Immersion Heater Tripping The Electrics
- How urgent
- Caution
- Who fixes it
- An electrician
What's happening?
When an immersion heater trips the electrics, it is causing either an earth leakage (tripping the RCD) or an overcurrent (tripping the MCB). This is a very common fault, especially in hard water areas where limescale attacks the element over time, degrading its insulation.
Book an electrician
What usually causes it?
- Heating element insulation breakdown: the most common cause by far
- Water ingress into the element terminal housing
- Corroded wiring connections at the immersion heater
- Faulty thermostat causing overcurrent
- Damaged cable between the spur and the immersion heater
- Leaking immersion heater boss allowing water onto connections
Is it dangerous?
An immersion heater that trips the electrics should not be used until repaired. The tripping indicates current is flowing where it should not: typically through the water or the earth conductor. This creates a genuine electric shock risk, particularly near the hot water cylinder.
Can I fix it myself?
You cannot safely fix this yourself. Turn off the immersion heater at the spur switch and leave it off until an electrician has attended. Do not keep resetting the trip switch.
When should you call an electrician?
Call an electrician as soon as you can. If the immersion heater is tripping the RCD and affecting other circuits in your home, treat it as more urgent. If you rely solely on the immersion for hot water, explain this when booking so the electrician can prioritise accordingly.
What will the electrician actually do?
- Isolate the immersion heater and test the circuit
- Perform insulation resistance testing on the element
- Inspect the terminal housing for water ingress and corrosion
- Drain the cylinder and replace the element and thermostat
- Check the wiring and connections
- Test the repaired installation to confirm safe operation
Who fixes this
What it usually costs
- Electrical Fault Finding Cost
- Priced on survey
Questions people ask
Why does my immersion heater trip the electrics?
Can I still use other electrics in the house?
How often do immersion elements need replacing?
Should I switch to a different hot water system?
Sources & References
Before you book, read how to check an electrician is qualified.
What would yours cost?
We'll tell you the price for this, then find a local electrician to do it.
Get my instant quote